| Eye bolt | 2 x 3/8-16 UNC |
| h | 60.325 mm |
| N1 | 28.575 mm |
| A2 | 250.825 mm |
| Bearing limiting speed | 2600 r/min |
| H | 377.825 mm |
| H2 | 76.2 mm |
| H1 | 190.5 mm |
| End plug (suffix Y) | EPR 19 |
| RG | 3/4 NPT |
| P180° | 89 kN |
| Cap bolt, SAE grade | 5 |
| J max. | 600.075 mm |
| J min. | 530.225 mm |
| P90° | 140 kN |
| Stabilizing ring | SR-36-30 |
| Initial grease fill | 1304.1 g |
| P120° | 84.5 kN |
| A1 | 180.975 mm |
| R1 | 114.3 mm |
2MMC9308WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | m | T | B | C | D | H | d | |
| K89308 | NTN | - | - | - | - | - | 78,000 mm | - | 40,000 mm |
| K89308-TV | INA | GS89308 / Allocated housing locating washer | 0,098 kg / Weight | - | - | - | 78 | - | 40 |
| K89308TN | NBS | - | - | - | - | 119 kN | 78 mm | - | 40 mm |
| 89308 | Loyal | - | - | - | - | 122 kN | 78 mm | 7,5 mm | 40 mm |
| 89308-TV | INA | GS89308 / Allocated housing locating washer | 0,484 kg / Weight | 22 mm | - | - | 78 mm | - | 40 mm |
| 89308TN | NBS | - | - | 22 mm | 7,5 mm | 119 kN | 78 mm | - | 40 mm |
| 2MM9308WIDULFS637 | TIMKEN | - | - | - | 0.945 Inch | 24 Millimeter | - | 2.441 Inch | 62 Millimeter | - | 1.575 Inch | 40 Millimeter |
| RM9308PP E9147 | TIMKEN | - | - | - | 0.472 Inch | 12 Millimeter | - | 2.441 Inch | 62 Millimeter | - | 1.575 Inch | 40 Millimeter |
| 3MMVC9308HX DUL | TIMKEN | - | - | - | 0.945 Inch | 24 Millimeter | - | 2.441 Inch | 62 Millimeter | - | 1.575 Inch | 40 Millimeter |
| 3MMVC9308HX DUM | TIMKEN | - | - | - | 0.945 Inch | 24 Millimeter | - | 2.441 Inch | 62 Millimeter | - | 1.575 Inch | 40 Millimeter |
| 3MMVC9308HXVVDULFS934 | TIMKEN | - | - | - | 0.945 Inch | 24 Millimeter | - | 2.441 Inch | 62 Millimeter | - | 1.575 Inch | 40 Millimeter |
| 3MM217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | B1:147 mm; G:M 160x3; d3:190 mm; d:160 mm; B4:28 mm; Hydraulic nut:HMV 32 E; Mass adapter sleeve assembly:7.95 kg; B:25 mm; d1:140 mm; |
| 2MM218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Fw:330 mm; Da max.:369 mm; Limiting speed:1300 r/min; Radial shaft seal:Available on request; Reference speed:1100 r/min; Basic static load rating C0:1800 kN; C:80 mm; D:380 mm; Fatigue load limit Pu:173 kN; Basic dynamic load rating C:594 kN; r1,2 min.:2.1 mm; ra max.:2 mm; Mass bearing:12.7 kg; |
| 2MMC218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Specific dynamic load factor K:100 N/mm²; d:31.75 mm; Specific static load factor K0:300 N/mm²; r2 min.:1 mm; Basic dynamic load rating C:125 kN; α:8 °; Material constant KM:330; Basic static load rating C0:375 kN; Da max.:58 mm; Sealing solution:Double-lip seals; da max.:41.8 mm; r1 m |
| 2MM216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | M:66.5 mm; d1:85 mm; d2:98 mm; f:8 mm; d:70 mm; B:2.5 mm; Mass lock washer:0.053 kg; |
| 3MM216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Basic static load rating C0:10200 kN; d:330 mm; F:365 mm; r1,2 min.:10.5 mm; D:460 mm; Calculation factor kr:650; Basic dynamic load rating C:4460 kN; Mass bearing:175 kg; r3,4 min.:1.5 mm; Fatigue load limit Pu:950 kN; b:11.1 mm; K:6 mm; α:20 °; D1 ≈:414.05 mm; B:340 mm; Design variant/fe |
| 3MMC216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Fatigue load limit Pu:15.6 kN; Da min.:62 mm; Basic static load rating C0:134 kN; T:45.5 mm; Limiting speed:8500 r/min; Mass bearing pair:1.09 kg; d:35 mm; Calculation factor Y1:0.81; da max.:45 mm; K:6 mm; rc max.:0.6 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; b:8 mm; Da max.:72.5 mm; D:80 mm; |
| 2MMC217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Calculation factor Y0:3.2; D1 ≈:839 mm; d2 ≈:727 mm; da max.:727 mm; K:12 mm; ra max.:6 mm; B1:301 mm; Basic static load rating C0:12500 kN; b:22.3 mm; Calculation factor e:0.21; Calculation factor Y2:4.8; Mass bearing + sleeve:595 kg; B5:97 mm; Reference speed:380 r/min; B:212 mm; Basic |
| 2MM217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | D:32.0000 mm; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:15000 rpm; Fillet Radius ra:0.64 mm; B:15.9 mm; Oil Speed Rating n2:20000 rpm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:5600 N; Basic Dynamic Radial Load Rating C:10400 N; d:12.000 mm; D2R:30.2 mm; |
| 2MMC216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | P90°:45.4 kN; J min.:219.075 mm; Stabilizing ring:2 x SR-15-0; Appropriate attachment bolt size G:0.625 in; P120°:28 kN; Initial grease fill:136.08 g; Cap bolt recommended tightening torque:81.3 N·m; A2:118.666 mm; Da:130 mm; ba:30.163 mm; PG:1/8 NPT; Housing:SAF 515; Pa:5.65 kN; h:31 |
| 3MMC217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | L:205 mm; Attachment bolt diameter G:12 mm; P120°:95 kN; ba max.:43 mm; P55°:250 kN; Calculation factor e:0.31; P180°:105 kN; J6:185 mm; P90°:150 kN; Tightening torque for attachment bolts:80 N·m; Limiting speed:4100 r/min; S:2.5 mm; H:111 mm; A3:50 mm; Calculation factor Y1:2 |
| 3MM218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | d:190 mm; Grease:1900 kN; D:340 mm; with tapered bore:1 600 min-1; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; with cylindrical bore:1 200 min-1; B:92 mm; rs (min):4 mm; Pu:1270 kN; Oil:172.970 kN; |
| 3MMC218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | r1 min.:1 mm; B:9.5 mm; Mass universal washer:0.8 kg; d:150 mm; D:190 mm; |
2MMC9308WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial Video
Timken Part Number 2MMC9308WI, Fafnir® Spindle Angular
Timken Part Number 2MMC9308WI, Fafnir® Spindle Angular Contact Ball Bearings. (9300WI, 9100WI, 200WI, 300WI). Timken® angular contact ball bearings
24 Millimeter TIMKEN 2MMC9308WI DUM Precision Ball Bear
Bearing No. 2MMC9308WI DUM. Category. Precision Ball Bearings. Inventory. 0.0. Manufacturer Name. TIMKEN. Minimum Buy Quantity. N/A. Weight. 0.263
TIMKEN 2mmc9308wi qum bearing - BEST BEARING | BEST
TIMKEN 2mmc9308wi qum bearing provide customers with a series of ... The main types of TIMKEN 2mmc9308wi qum bearing : deep groove ball bearings,
48 Millimeter TIMKEN 2MMC9308WI QUL Precision Ball
Advance 1.575 Inch | 40 Millimeter x 2.441 Inch | 62 Millimeter x 1.89 Inch | 48 Millimeter TIMKEN 2MMC9308WI QUL Precision Ball Bearings is your
2MMC9308WI - Timken CAD
Browse Part Number 2MMC9308WI, Fafnir® Spindle Angular Contact Ball Bearings (9300WI, 9100WI, 200WI, 300WI) in the The Timken Company catalog
TIMKEN 2mmc9308wi qul bearing - BEST BEARING | BEST
Combined with the TIMKEN 2mmc9308wi qul bearing , TIMKEN 2mmc9308wi qul bearing has the most complete product outline in rolling bearing industry
timken 2mmc9308wi qul bearing - Top Bearing Manufacturer
timken 2mmc9308wi qul bearing are better than any brand bearings currently in bearing performance, lifetime, design, and the use of performance.timken
Timken® 2MMC9308WI DUL | Purvis Industries
Timken® 2MMC9308WI DUL 2MM9300WI Light Duty Super Precision Angular Contact Ball Bearing With Ceramic Ball, 40 mm Bore Dia, 62 mm OD, 2 Rows,