| N1 | 19.05 mm |
| R1 | 42.862 mm |
| H1 | 76.2 mm |
| PG | 1/8 NPT |
| Taconite seal (dc shaft position) | TER 23 |
| S | 5.556 mm |
| Initial grease fill | 53.865 g |
| RG | 1/8 NPT |
| Taconite seal (db shaft position) | TER 35 |
| J min. | 196.85 mm |
| P90° | 23.6 kN |
| db | 60.325 mm |
| End plug (suffix Y) | EPR 5 |
| Cap bolt recommended tightening torque | 149.1 N·m |
| P60° | 39.1 kN |
| Mass pillow block | 10.2 kg |
| H2 | 28.575 mm |
| R2 | 19.05 mm |
| Ca | 50.8 mm |
| ba | 34.925 mm |
2MM9320WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | m | D | B | T | A | C | |
| 128DC89320 | KOYO | - | 640 mm | - | 890 mm | 320 mm | - | - | 7330 kN |
| 713649320 | FAG | - | - | - | - | - | - | - | - |
| K89320 | NTN | - | 100,000 mm | - | 170,000 mm | - | - | - | - |
| K89320-M | INA | GS89320 / Allocated housing locating washer | 100 | 1,18 kg / Weight | 170 | - | - | - | - |
| K89320M | SKF | - | 100 mm | - | 170 mm | - | 109 mm | - | - |
| 29320 | NTN | - | 100 mm | - | 170 mm | - | 42 mm | 58 mm | 345 kN |
| 29320 M | Loyal | - | 100 mm | - | 170 mm | - | 42 mm | - | 408 kN |
| 29320-E1 | FAG | - | 100 mm | 3,6 kg / Weight | 170 mm | - | 42 mm | 58 mm | - |
| 29320E | NACHI | - | 100 mm | - | 170 mm | 14 mm | 42 mm | 58 mm | 355 kN |
| 29320EX | NACHI | - | 100 mm | - | 170 mm | 27 mm | 42 mm | 58 mm | 435 kN |
| 29320M | FBJ | - | 100 mm | - | 170 mm | - | 42 mm | - | 415 kN |
| 2MMC216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | P90°:45.4 kN; J min.:219.075 mm; Stabilizing ring:2 x SR-15-0; Appropriate attachment bolt size G:0.625 in; P120°:28 kN; Initial grease fill:136.08 g; Cap bolt recommended tightening torque:81.3 N·m; A2:118.666 mm; Da:130 mm; ba:30.163 mm; PG:1/8 NPT; Housing:SAF 515; Pa:5.65 kN; h:31 |
| 2MMC218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Specific dynamic load factor K:100 N/mm²; d:31.75 mm; Specific static load factor K0:300 N/mm²; r2 min.:1 mm; Basic dynamic load rating C:125 kN; α:8 °; Material constant KM:330; Basic static load rating C0:375 kN; Da max.:58 mm; Sealing solution:Double-lip seals; da max.:41.8 mm; r1 m |
| 2MMC217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Calculation factor Y0:3.2; D1 ≈:839 mm; d2 ≈:727 mm; da max.:727 mm; K:12 mm; ra max.:6 mm; B1:301 mm; Basic static load rating C0:12500 kN; b:22.3 mm; Calculation factor e:0.21; Calculation factor Y2:4.8; Mass bearing + sleeve:595 kg; B5:97 mm; Reference speed:380 r/min; B:212 mm; Basic |
| 2MM218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Fw:330 mm; Da max.:369 mm; Limiting speed:1300 r/min; Radial shaft seal:Available on request; Reference speed:1100 r/min; Basic static load rating C0:1800 kN; C:80 mm; D:380 mm; Fatigue load limit Pu:173 kN; Basic dynamic load rating C:594 kN; r1,2 min.:2.1 mm; ra max.:2 mm; Mass bearing:12.7 kg; |
| 3MM217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | B1:147 mm; G:M 160x3; d3:190 mm; d:160 mm; B4:28 mm; Hydraulic nut:HMV 32 E; Mass adapter sleeve assembly:7.95 kg; B:25 mm; d1:140 mm; |
| 2MM216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | M:66.5 mm; d1:85 mm; d2:98 mm; f:8 mm; d:70 mm; B:2.5 mm; Mass lock washer:0.053 kg; |
| 2MM217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | D:32.0000 mm; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:15000 rpm; Fillet Radius ra:0.64 mm; B:15.9 mm; Oil Speed Rating n2:20000 rpm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:5600 N; Basic Dynamic Radial Load Rating C:10400 N; d:12.000 mm; D2R:30.2 mm; |
| 3MMC216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Fatigue load limit Pu:15.6 kN; Da min.:62 mm; Basic static load rating C0:134 kN; T:45.5 mm; Limiting speed:8500 r/min; Mass bearing pair:1.09 kg; d:35 mm; Calculation factor Y1:0.81; da max.:45 mm; K:6 mm; rc max.:0.6 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; b:8 mm; Da max.:72.5 mm; D:80 mm; |
| 3MM216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Basic static load rating C0:10200 kN; d:330 mm; F:365 mm; r1,2 min.:10.5 mm; D:460 mm; Calculation factor kr:650; Basic dynamic load rating C:4460 kN; Mass bearing:175 kg; r3,4 min.:1.5 mm; Fatigue load limit Pu:950 kN; b:11.1 mm; K:6 mm; α:20 °; D1 ≈:414.05 mm; B:340 mm; Design variant/fe |
| 3MMC218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | r1 min.:1 mm; B:9.5 mm; Mass universal washer:0.8 kg; d:150 mm; D:190 mm; |
| 3MM218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | d:190 mm; Grease:1900 kN; D:340 mm; with tapered bore:1 600 min-1; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; with cylindrical bore:1 200 min-1; B:92 mm; rs (min):4 mm; Pu:1270 kN; Oil:172.970 kN; |
| 3MMC217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | L:205 mm; Attachment bolt diameter G:12 mm; P120°:95 kN; ba max.:43 mm; P55°:250 kN; Calculation factor e:0.31; P180°:105 kN; J6:185 mm; P90°:150 kN; Tightening torque for attachment bolts:80 N·m; Limiting speed:4100 r/min; S:2.5 mm; H:111 mm; A3:50 mm; Calculation factor Y1:2 |
2MM9320WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial Video
TIMKEN 2mm9320wi duh bearing - BEST BEARING | BEST
TIMKEN 2mm9320wi duh bearing provide customers with a series of comprehensive ... The main types of TIMKEN 2mm9320wi duh bearing : deep groove ball
2MM9320WI DUL | Precision Ball Bearings | Ball Bearings
2MM9320WI DUL ; SUPERPRECISION. 100MM Bore; 140MM Outside Diameter; ... Manufacturer Name. TIMKEN. Minimum Buy Quantity. N/A. Weight / Kilogram
timken 2mm9320wi tum bearing - Top Bearing Manufacturer
timken 2mm9320wi tum bearing are better than any brand bearings currently in bearing performance, lifetime, design, and the use of performance.timken
Timken Part Number 2MM9320WI, Fafnir® Spindle Angular
Timken Part Number 2MM9320WI, Fafnir® Spindle Angular Contact Ball Bearings (9300WI,. 9100WI, 200WI, 300WI). Timken® angular contact ball bearings are
Timken® 2MM9320WI DUL | Purvis Industries
Timken® 2MM9320WI DUL 2MM9300WI Light Duty Super Precision Angular Contact Ball Bearing With Steel Ball, 100 mm Bore Dia, 140 mm OD, 2 Rows,
TIMKEN 2mm9320wi tuh bearing - BEST BEARING | BEST
TIMKEN 2mm9320wi tuh bearing provide customers with a series of ... The main types of TIMKEN 2mm9320wi tuh bearing : deep groove ball bearings, angular
Timken (Fafnir) - 2MM9320WI DUL - Motion Industries
Timken (Fafnir) 2MM9320WI DUL. Spindle & Precision Machine Tool Angular Contact Bearing - 100 mm ID, 140 mm OD, 20 mm Width, 15 ° Contact, ABEC 7
2MM9320WI - Timken CAD
Browse Part Number 2MM9320WI, Fafnir® Spindle Angular Contact Ball Bearings (9300WI, 9100WI, 200WI, 300WI) in the The Timken Company catalog