| Basic Static Radial Load Rating Co | 80000 N |
| Fillet Radius ra | 1.50 mm |
| B | 42.90 mm |
| Grease Speed Rating n1 | 4500 rpm |
| Sealed Speed Rating n3 | 4500 rpm |
| D | 100.0000 mm |
| Oil Speed Rating n2 | 6000 rpm |
| Basic Dynamic Radial Load Rating C | 80900 N |
| d | 45.000 mm |
| Accessories | One Shield & Snap-Ri |
2MM205WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | B | T | d | F | S | C | N | L |
| ARN2052 | NTN | - | 46,000 mm | 20,000 mm | - | - | - | - | - |
| ARN2052T2 | NTN | - | 46 mm | 20 mm | 25 mm | - | 16 mm | - | - |
| ALF205 | KOYO | - | - | 25 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
| ALF205-14 | KOYO | - | - | 22,225 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
| ALF205-15 | KOYO | - | - | 23,8125 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
| ALF205-16 | KOYO | - | - | 25,4 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
| YSPAG 205 | SKF | - | - | 25 mm | - | - | 15 mm | - | - |
| YSPAG 205-100 | SKF | - | - | 25.4 mm | - | - | 15 mm | - | - |
| AXN2052 | NTN | - | 40 mm | 20 mm | 25 mm | - | 16 mm | - | - |
| 20205 | ISO | 15 mm | - | 25 mm | - | - | 15 mm | - | - |
| 20205 C | Loyal | 15 mm | - | 25 mm | - | - | 24 kN | - | - |
| 3MMC218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | r1 min.:1 mm; B:9.5 mm; Mass universal washer:0.8 kg; d:150 mm; D:190 mm; |
| 2MM218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Fw:330 mm; Da max.:369 mm; Limiting speed:1300 r/min; Radial shaft seal:Available on request; Reference speed:1100 r/min; Basic static load rating C0:1800 kN; C:80 mm; D:380 mm; Fatigue load limit Pu:173 kN; Basic dynamic load rating C:594 kN; r1,2 min.:2.1 mm; ra max.:2 mm; Mass bearing:12.7 kg; |
| 3MMC216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Fatigue load limit Pu:15.6 kN; Da min.:62 mm; Basic static load rating C0:134 kN; T:45.5 mm; Limiting speed:8500 r/min; Mass bearing pair:1.09 kg; d:35 mm; Calculation factor Y1:0.81; da max.:45 mm; K:6 mm; rc max.:0.6 mm; r5 min.:0.6 mm; Calculation factor Y0:0.8; b:8 mm; Da max.:72.5 mm; D:80 mm; |
| 2MM217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | D:32.0000 mm; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:15000 rpm; Fillet Radius ra:0.64 mm; B:15.9 mm; Oil Speed Rating n2:20000 rpm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:5600 N; Basic Dynamic Radial Load Rating C:10400 N; d:12.000 mm; D2R:30.2 mm; |
| 2MM216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | M:66.5 mm; d1:85 mm; d2:98 mm; f:8 mm; d:70 mm; B:2.5 mm; Mass lock washer:0.053 kg; |
| 3MMC217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | L:205 mm; Attachment bolt diameter G:12 mm; P120°:95 kN; ba max.:43 mm; P55°:250 kN; Calculation factor e:0.31; P180°:105 kN; J6:185 mm; P90°:150 kN; Tightening torque for attachment bolts:80 N·m; Limiting speed:4100 r/min; S:2.5 mm; H:111 mm; A3:50 mm; Calculation factor Y1:2 |
| 2MMC216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | P90°:45.4 kN; J min.:219.075 mm; Stabilizing ring:2 x SR-15-0; Appropriate attachment bolt size G:0.625 in; P120°:28 kN; Initial grease fill:136.08 g; Cap bolt recommended tightening torque:81.3 N·m; A2:118.666 mm; Da:130 mm; ba:30.163 mm; PG:1/8 NPT; Housing:SAF 515; Pa:5.65 kN; h:31 |
| 2MMC217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Calculation factor Y0:3.2; D1 ≈:839 mm; d2 ≈:727 mm; da max.:727 mm; K:12 mm; ra max.:6 mm; B1:301 mm; Basic static load rating C0:12500 kN; b:22.3 mm; Calculation factor e:0.21; Calculation factor Y2:4.8; Mass bearing + sleeve:595 kg; B5:97 mm; Reference speed:380 r/min; B:212 mm; Basic |
| 3MM216WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Basic static load rating C0:10200 kN; d:330 mm; F:365 mm; r1,2 min.:10.5 mm; D:460 mm; Calculation factor kr:650; Basic dynamic load rating C:4460 kN; Mass bearing:175 kg; r3,4 min.:1.5 mm; Fatigue load limit Pu:950 kN; b:11.1 mm; K:6 mm; α:20 °; D1 ≈:414.05 mm; B:340 mm; Design variant/fe |
| 2MMC218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | Specific dynamic load factor K:100 N/mm²; d:31.75 mm; Specific static load factor K0:300 N/mm²; r2 min.:1 mm; Basic dynamic load rating C:125 kN; α:8 °; Material constant KM:330; Basic static load rating C0:375 kN; Da max.:58 mm; Sealing solution:Double-lip seals; da max.:41.8 mm; r1 m |
| 3MM217WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | B1:147 mm; G:M 160x3; d3:190 mm; d:160 mm; B4:28 mm; Hydraulic nut:HMV 32 E; Mass adapter sleeve assembly:7.95 kg; B:25 mm; d1:140 mm; |
| 3MM218WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial | d:190 mm; Grease:1900 kN; D:340 mm; with tapered bore:1 600 min-1; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; with cylindrical bore:1 200 min-1; B:92 mm; rs (min):4 mm; Pu:1270 kN; Oil:172.970 kN; |
2MM205WI TIMKEN Tapered Roller Bearings TDI Tapered Double Inner Imperial Video
Timken® 2MM205WI DUL | Purvis Industries
Timken® 2MM205WI DUL 2MM200WI Light Duty Super Precision Angular Contact Ball Bearing With Steel Ball, 25 mm Bore Dia, 52 mm OD, 2 Rows, 15 mm W,
2MM205WI
Browse Part Number 2MM205WI, Fafnir® Spindle Angular Contact Ball Bearings (9300WI, 9100WI, 200WI, 300WI) in the The Timken Company catalog
Timken 2MM205WI DUL 25mm ID 52mm OD 15mm Width 15
Find many great new & used options and get the best deals for Timken 2MM205WI DUL 25mm ID 52mm OD 15mm Width 15 ° Contact Bearing at the best online
Buy TIMKEN 2MM205WI DUM Ball Bearing at 3BG Supply Co
Buy TIMKEN 2MM205WI DUM Ball Bearing from 3BG Supply. Buy TIMKEN Ball Bearing online from 3BG Supply - We simplify & supply industrial MRO and
Timken (Fafnir) - 2MM205WI DUL - Motion Industries
Timken (Fafnir) 2MM205WI DUL. Spindle & Precision Machine Tool Angular Contact Bearing - 25 mm ID, 52 mm OD, 15 mm Width, 15 ° Contact, ABEC 7 (ISO
Timken Co. | 2MM205WI DUL | Light 2MM200WI & 3MM200WI
Shop Timken Co. 2MM205WI DUL at Applied.com, which includes; 25 mm ID x 52 mm OD x 15 mm Wide, Extra Precision (ABEC 7), 15° Contact Angle, Light
Timken (Fafnir) - 2MM205WI DUM - Motion Industries
Timken (Fafnir) 2MM205WI DUM. Spindle & Precision Machine Tool Angular Contact Bearing - 25 mm ID, 52 mm OD, 15 mm Width, 15 ° Contact, ABEC 7 (ISO
Timken Precision Angular Contact Ball Bearing 2MM205WI
Manufacturer Part Number: 2MM205WI DUL TECHNICAL SPECIFICATIONS: 2MM205WI DUL, Timken Single Row Ball Angular Contact Bearing, Series: